| Projuct |
i450 |
| General specifications |
| Power requirements |
Single phase AC220V 15A 50/60HZ |
| Air pressure requirements |
≥0.5MPa |
| Control system |
WINDOWS 7+sonic soft-bodied |
| Contour size (L*W*H) |
L1000*W1650*1680mm |
| Device ontology specification |
| Working methods |
Laser move |
| Laser type |
UV/FAYB/C02/GR |
| PC |
Industrial computer |
| System access |
Access MES/SHOPFLOW/IMS/Intelligent Management System such as Non-Standard Customization |
| Positioning system |
CCD+MARK location |
| Misplaced material identification function |
Forward, Back and Wrong Board Recognition |
| Double sided printing |
Built-in reprint mechanism, can realize double-sided carving, double-sided reading |
| High and low difference engraving |
Configure the Z-axis to adjust automatically |
| On line reading function |
Yes, after reading the code, the system can be saved locally or uploaded fine checksum |
| Sculpt PCB Dimensions |
Min.50*50mm/max.460*400mm |
| Track width adjustment system |
Automatic adjustments |
| Control system |
PC+shaft chuck+servomotor |
| Direction of transmission |
The interface can be left to right or right. If there is a turnover mechanism, it will not limit the flow direction |
| Permissible deformation of PCB |
＜3mm |
| Adapt to PCB thickness |
0.5-5mm |
| PCB Top Surface Passing Height |
55mm |
| PCB under-surface pass height |
45mm |
| Oorbital transfer velocity |
50-3000mm |
| Badmark recognition function |
Automatic Identification Type "X", no carving |
| Soot disposal system |
Standard soot processor, filter smoke and odor |
| Accuracy of Coding Position |
±0.1mm |
| Laser specification |
| Wavelength |
355NM |
| Lasing power |
3W/5W/10W/20W |
| Print speed |
700 words/sec |
| Printing angle |
0-360° |
| Range of types of print |
105*105mm |
| Focal distance |
254mm |
| Corresponding line speed |
Under 120m/min |
| Engrave content |
1D/2D Barcode, Numbers, characters, LOGO, Graphical, etc |
| Cooling method |
Forced air cooling |
